Semi-finished product or end result
With the Asiga 3D printer you can make extremely high resolution prints with precision in details. Clean-cut models are immediately ready as an end result, but can also be used, for example, as a master model in the production of casting moulds.
Projector position
The big difference in the three variants of the Asiga MAX X is the height of the projector. This is set differently for each variant. The rule of thumb here is that the lower the projector is in the 3D printer, the larger the print surface. A low projector has the advantage that you can make larger prints in terms of surface area, but also in terms of height. The disadvantage of this is that this is slightly at the expense of the resolution. Depending on your production, you choose the most suitable printer.
100% Open Material System
Asiga has built its machines in such a way that it is possible to use third party materials during printing. You are not dependent on the materials that Asiga can supply. The advantage of the printing materials of the Asiga brand is that they are extremely suitable for their machines.
Specifications
| Asiga MAX X27 | Asiga MAX X35 | Asiga MAX X43 | |
| Build volume X-Y-Z | 51.8 × 29.2 × 75mm | 67.2 × 37.8 × 75mm | 82.3 × 46.4 × 75mm |
| Pixel resolution | 27 µm | 35 µm | 43 µm |
| Technology | DLP | DLP | DLP |
| LED Wavelength | 385nm (high power UV-LED) of 405nm |
| File Inputs | STL, SLC, PLY, STM (Asiga Stomp file format) |
| Network compatibility | Wifi, Wireless Direct, Ethernet |
| Power requirements | 100 tot 240 VAC, 50/60 Hz, ≤2 Amp |
With purchase you will receive
DTR Service
Need help choosing the right 3D-printer for your production? We think along with you and are happy to tell you personally everything you need to know.
Technical support is available in Dutch, English and German language.
